#PCIE THUNDERBOLT 3 CARD WINDOWS 10 INSTALL#

The HP Thunderbolt в„ў 2 PCIe Card requires a DisplayPort input to enable downstream DisplayPort devices on the Thunderbolt в„ў daisy chain. NOTE: Not all models are available in all regions. > 'The HP Thunderboltв„ў 2 PCIe Card is compatible with the HP Z230, Z440, Z420, Z640, Z620, Z840 and Z820 Workstations'Д¬ompatability: The HP Thunderboltв„ў 2 PCIe Card is compatible with the HP Z230, Z440, Z420, Z640, Z620, Z840 and Z820 Workstations. The original September, 2015 HPQuickSpecs page for the F3F43AA: Latest win 7 ењ†4 driver for the Thunderbolt 2 card you have isВ sp64805ДЄlso, it appears that you also need a recent version of the bios to use this card either use 3.91 or latest 3.92 for the z820 and the card must be in slot #5 Look under the 'Driver-controller tab on this page: The latest compatible software/driver at this time is 15.2.35.250 Rev.B (SoftPaq SP74948), and can be aquired through the HP Support Center but this driver may be only for the thunderbolt 3 card, you will have to checkД®dit: the above sp74948 is the driver HP lists for the z840 using theВ F3F43AT thunderbolt-2 card under Win 10 ењ†4ДЄs such i see no reasion it will not work under the z20 with win 10 ењ†4 HP began supporting Thunderbolt under Windows 10 as of March 2016.

#PCIE THUNDERBOLT 3 CARD WINDOWS 10 INSTALL#

Have you tried to install the drivers using win 7 compatability mode?Д®dit, digging further i found this information: If you go this route i highly recomend making a image of the drive so future reinstalls can simply use the working win 10 image instead of the win 7 to 10 method The only way i know that DOES WORK is to install the card/drivers under windows 7 and then upgrade to windows 10

Pcie thunderbolt 3 card windows 10